Segger Logo Embedded Software Solutions
Software productsHardware productsDownloadsPricesCustomersOur PartnersSitemapForumAbout us
NEC V850-Touch it!
| Analog Devices |Atmel |Freescale |LuminaryMicro |Microchip |NEC |NXP |Oki |Renesas |Sharp |ST Microelectronics |Texas Instruments |Toshiba |

We have board support packages (BSPs) and complete projects available for various NEC Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

  • embOS - real time OS / RTOS
  • emWin - graphic software / GUI
  • emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
  • emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

Touch it!

NEC V850-Touch it!

 

Controller: CPU:
  • V850ES

Board main features:
  • 3.5" 1/4 VGA TFT LCD Module with TouchScreen
  • Reset button
  • Two pushbuttons
  • USB connector
  • Connector for V850 Flash programming and on-chip debug (with optional MINICUBE2)
  • Three LEDs (red, yellow, blue)

Processor main features:
  • 256 Kbytes of Flash memory from a single power supply
  • The V850ES CPU core operates at 17 MHz with a performance of 21 MIPS
  • The Flash PROM and Mask ROM version operate on an ultra-low voltage
  • Low power consumption
  • High-performance 32-bit architecture for embedded control
    • Number of instructions: 83
    • 32-bit general-purpose registers: 32
    • Load/store instructions in long/short format
    • 3-operand instruction
    • 5-stage pipeline of 1 clock cycle per stage
    • Hardware interlock on register/flag hazards
    • Memory space Program space: 64 MB linear (Usable area: 16 MB linear space + internal RAM area 60 KB) Data space: 4 GB linear
  • Special instructions
    • Saturation operation instructions
    • Bit manipulation instructions
    • Multiply instructions (On-chip hardware multiplier executing multiplication in 1 or 4 clocks)

For evaluation software contact sales@segger.com.