|
We have board support packages (BSPs) and complete projects
available for various NEC Eval boards.
Different software packages are available for different
boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages
are trial versions, which come with the software in a library and the
application in source code form, as well as a project for the IDE that
has been used. Trial versions can usually be recompiled easily in less
than a minute if the required compiler and IDE is installed. The application
program can be modified, allowing intensive tests of the software. emWin
trial versions usually also contain a simulation environment which allows
test and recompilation on a PC.
Below is a list of supported Eval boards. The software
can easily be ported to other hardware platforms. If you are looking for
software for an Eval board not in this list, please get in touch with
us.
Supported Eval boards
NEC AF-EV850 Eval board
|
Controller:
CPU:
Board main features:
- 3.5" 1/4 VGA TFT LCD Panel with Touch-screen
- Device support for V850ES/JJ3, V850ES/JJ2, V850ES/SJ3 and V850ES/KJ2 series microcontrollers
- MINICUBE debugging interface
- MINICUBE2 debugging and flash programming interface
- Expansion interface for memory
- Expansion interface for peripherals
- ZigBee™ interface that supports Chipcon and Uniband Electronic Corp. (UBEC) radio frequency (RF) modules
- SDIO card interface
- 16 KB 2-wire EEPROM
- DB9 RS232 interface
- USB-UART interface
- 4-digit 7-segment LED
- Two light-emitting diodes (LEDs) for power-on and reset signal indication
- One reset switch button and two user buttons
- One potentiometer and one temperature sensor as analog-to-digital (A/D) inputs
- Supercapacitor for power backup
More |
NEC V850-Touch it! Eval board
|
Controller:
CPU:
Board main features:
- 3.5" 1/4 VGA TFT LCD Module with TouchScreen
- Reset button
- Two pushbuttons
- USB connector
- Connector for V850 Flash programming and on-chip debug (with optional MINICUBE2)
- Three LEDs (red, yellow, blue)
More |
NEC 78K - Test it! Eval board
|
Controller:
CPU:
Board main features:
- LED output
- AD reference voltage
- Battery powered
- Serial communication interface program
- Analogue to digital signal conversion is supported
- 12 I/O ports prepared to be connected to user hardware
- Timer input / output signals
- Two or three wire serial I/O
- RS232 signals including RTS / CTS
- 4 analogue input lines
- 8 I/O ports connected to LED
- 2 push buttons prepared for external interrupt generation
More |
NEC K_Line - Play it! Eval board
|
Controller:
- uPD70F3210GC / uPD78F0148 (KF1 devices)
CPU:
Board main features:
- Battery powered
- Serial communication interface program
- Analogue to digital signal conversion is supported
- All I/O ports prepared to be connected to user hardware
- Timer input / output signals
- Two or three wire serial I/O
- RS232 signals including RTS / CTS
- 5 analogue input lines
- 9 I/O ports connected to LED
- Start button
- 2 push buttons prepared for external interrupt generation
More |
NEC 78K0R – Cool it! Eval board
|
Controller:
- uPD78F1166 (78K0R/KG3 device family)
CPU:
Board main features:
- On-Board debug function (TK-78K0R debugging)
- 16*2 character LC display
- Navigation switch
- Configuration switch
- Reset button
- Four LEDs (LED 1-3 + Power LED)
- Power supply by USB interface
- Various input / output signals available, such as
- I/O ports prepared to be connected to user hardware
- Timer input / output signals
- Two or three wire serial I/O
- Virtual UART interface, via the µPD78F0731 78K0 8-bit microcontroller with on-board USB interface
- 16 analog input lines
- 2 analog output lines
- Analog to digital signal conversion
- Digital to analog signal conversion
More |
Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
April 15, 2008
|
Software
for NEC Eval boards
