Segger Logo Embedded Software Solutions
Software productsHardware productsDownloadsPricesCustomersOur PartnersSitemapForumAbout us
Luminary LM3S3748 EVB
| Analog Devices |Atmel |Freescale |LuminaryMicro |Microchip |NEC |NXP |Oki |Renesas |Sharp |ST Microelectronics |Texas Instruments |Toshiba |

We have board support packages (BSPs) and complete projects available for various Luminary Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

  • embOS - real time OS / RTOS
  • emWin - graphic software / GUI
  • emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
  • emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

LM3S3748 EVB

Luminary LM3S3748 EVB

 

Controller:
  • LM3S3748
CPU:
  • ARM Cortex-M3

Board main Features:
  • 128x128 CSTN LCD graphics display
  • USB host connector
  • MiniUSB device connector
  • external +3.3V power supply
  • 2 channel oscilloscope
  • microSD card slot
  • 3 status LEDs
  • Reset push button
  • Debugger USB interface
  • JTAG/SWD connector

Processor main features:
  • Implements the ARM architecture v7-M
  • Thumb-2 instruction set (Enhanced levels of performance, energy efficiency, code density, mixed mode capability, ARM levels of performance with Thumb level code density)
  • Memory Protection Unit (MPU)
  • Embedded Trace Macrocell(ETM)
  • Data Watchpoint and Trace unit (DWT)
  • Flash Patch and Breakpoint unit (FPB)
  • Debug Port (SW-DP or SWJ-DP)
  • Single cycle multiply and hardware divide instructions
  • Preconfigured memory map
  • Up to 4 gigabytes of addressable memory space
  • Predefined addresses for code, memory, external devices, peripherals
  • Dedicated space for vendor specific addressability
  • Atomic bit manipulation with bit banding (Direct access to single bits of data)
  • Unaligned data storage and access
  • Integrated sleep modes (Sleep Now, Sleep on Exit)

Available software:
Segger Eval Software (embOS) IARV5

 

Copyright SEGGER Microcontroller GmbH & Co.KG. All rights reserved.
For more information, please visit our web site www.segger.com or contact us at info@segger.com
Last update: April 22, 2008