|
We have board support packages (BSPs) and complete
projects available for various Luminary Eval boards.
Different software packages are available for
different boards; the packages include some or all of the following
components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-,
NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk,
MSD, CDC, HID and more
Some packages are executable demos, which can
not be modified; some packages are trial versions, which come with
the software in a library and the application in source code form,
as well as a project for the IDE that has been used. Trial versions
can usually be recompiled easily in less than a minute if the required
compiler and IDE is installed. The application program can be modified,
allowing intensive tests of the software. emWin trial versions usually
also contain a simulation environment which allows test and recompilation
on a PC.
Below is a list of supported Eval boards. The
software can easily be ported to other hardware platforms. If you
are looking for software for an Eval board not in this list, please
get in touch with us.
Supported Eval boards
Luminary LM3S3748 EVB
| |
|
Controller:
CPU:
Board main Features:
- 128x128 CSTN LCD graphics display
- USB host connector
- MiniUSB device connector
- external +3.3V power supply
- 2 channel oscilloscope
- microSD card slot
- 3 status LEDs
- Reset push button
- Debugger USB interface
- JTAG/SWD connector
More |
Luminary LM3S6965 Ethernet Eval board
| |
|
Controller:
CPU:
Board main Features:
- 10/100 Ethernet
- Simple setup: USB cable provides serial
communication, debugging, and power
- OLED graphics display with 128 x 64 pixel
resolution and 16 shades of gray
- User LED, navigation switches, and select
pushbuttons
- Magnetic speaker
- All LM3S6965 I/O available on labeled
break-out pads
- Standard ARMŽ 20-pin JTAG debug connector
with input and output modes
- microSD card slot
More |
Luminary LM3S2965 CAN Eval board
|
Controller:
CPU:
Board main Features:
- Fully operational CAN Network-in-a-box
- 128x64 pixel 16-shade monochromatic OLED
display
- User-programmable push buttons and LED
- Magnetic speaker
- Convenient reset push button and power
indicator LED
- Serial in-circuit debug interface over
USB
- Powered over USB with included USB cable
- Break-out pads for all LM3S2965 I/O
More |
Luminary LM3S1968 Eval board
|
Controller:
CPU:
Board main Features:
- Support for battery-backed hibernate
mode
- OLED graphics display with 128 x 96 pixel
resolution
- User LED, navigation switches, and select
pushbuttons
- Magnetic speaker
- LM3S1968 I/O available on labeled break-out
pads
- Standard ARMŽ 20-pin JTAG debug connector
with input and output modes
More |
Luminary LM3S8962 Eval board
|
Controller:
CPU:
Board main Features:
- fully-integrated 10/100 embedded Ethernet
controller
- OLED graphics display with 128 x 96 pixel
resolution
- User LED, navigation switches, and select
pushbuttons
- Magnetic speaker
- LM3S8962 I/O available on labeled break-out
pads
- Standard ARMŽ 20-pin JTAG debug connector
with input and output modes
- Standalone CAN device board using Stellaris
LM3S2110 microcontroller
More |
Copyright SEGGER Microcontroller GmbH &
Co.KG. All rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
April 22, 2008
|
Software
for Luminary Eval boards
