General Features:
- USB-driven JTAG and Trace (38-pin Mictor) interface
- Supports all ARM7 and ARM9 devices
- No power supply required, powered through USB, although external
power supply plug is available
- JTAG speed 12 MHz
- Auto speed recognition
- USB-2 full speed (12Mbit/sec)
- Adaptive clock based on RTCK JTAG signal
- All signals can be monitored, target voltage can be measured
- 20-pin standard JTAG connector, 38-pin standard Trace Mictor
connector
- USB, 20-pin flat cable and 38-pin trace cable included
- Full integration with the C-SPY Debugger; advanced debugging
features available from C-SPY
- Integration into IAR Embedded Workbench for ARM makes setup
and use easy
- Supported platforms: Windows 2000 and Windows XP
|
 |
Trace Features:
- Trace supports up to 200 MHz full and 100 MHz half clock rate
- Trace based on ARM ETM (Embedded Trace Macrocell)
- Trace support for devices with built-in trace ports
- 2 Mbyte trace memory buffer
- Compact housing, fits easily on the desk
- Silent, fanless design
- Support for cycle accurate and compressed tracing
- Supports 4 / 8 / 16 bit trace port at both full and half-rate clocking
- Trace window synchronizes to source and disassembly window
- Function trace shows called functions hierarchically
|
J-Trace
ARM: General Info
