| Step 1 |
| Start the Real View debugger: |
 |
| Step 2 |
| Select File\Connection\Connect to Target |
 |
| Step 3 |
| In the "Connection Control" Dialog use the right mouse
click on the first item and select "Add/Remove/Edit Devices" |
 |
| Step 4 |
| Now select "Add DLL" to browse for the J-Link RDI Dll. |
 |
| Step 5 |
| Now select the DLL and klick the "Open" Button to add
the J-Link RDI DLL. |
 |
| Step 6 |
| After adding the Dll, an additional Dialog opens
and asks for description: (These values are voluntary, if you do not
want change them, just click "OK") Use the following values
and click on "OK" Short Name : JLinkRDI Description: J-Link ARM RDI
Interface Now click "OK" |
 |
| Step 7 |
Back in the “RDI Target List” Dialog
Select "JLink-RDI" and click "Configure". For configuration details
please refer to the Configuration
chapter. |
 |
| Step 8 |
| Click the "OK" button in the configuration
dialog. Now close the "RDI Target List" Dialog. Be sure your target
hardware is already connected to J-Link. |
 |
| Step 9 |
In the "Connection control", expand the "JLink RDI" and select
the ARM_0 Processor.
Close the "Connection Control" Window. |
 |
| Step 10 |
| Now the RealView Debugger is connected to the J-Link. |
 |
| Step 11 |
| A project or an image is needed for debugging. After downloading,
J-Link is used to debug the target. |
 |
Using J-Link
with RVDS (Realview developer suite by ARM Ltd.)
