Programming speed
J-Flash enables you to program your Flash EEPROM devices
via the On-Chip Debug connector (JTAG) on your target system. Internal
as well as external flash is supported. The following table shows some
performance values regarding the programming speed.
External flash
| Atmel AT49BV162A |
1x16 bits |
97.8 |
Atmel AT91EB40 |
| Intel 28F640J3 |
1x16 bits |
93.0 |
Cogent CSB337 |
| AMD AM29LV160DB |
2x16 bits |
208.5 |
Net Silicon NS9360 |
| Intel 28F640J3A120 |
2x16 bits |
147.8 |
Logic LH7A400-10 |
Microcontroller with internal flash
| Analog Devices ADuC7020 |
30.8 |
Analog Devices ADuC7020 evalboard |
| Atmel AT91SAM7S64 |
18.5 |
Atmel AT91SAM7-EKS64 |
| Atmel AT91SAM7X256 |
35.3 |
Atmel AT91SAM7X-EK |
| Philips LPC2106 |
22.2 |
IAR LPC2106 kickstart board |
| ST STR711 |
50.5 |
IAR STR711 evalboard |
| Philips PCF87750 |
68.2 |
Philips PCF87750 (custom hardware) |
Copyright SEGGER Microcontroller GmbH & Co.KG. All
rights reserved.
For more information, please visit our web site
www.segger.com or contact us at info@segger.com
Last update:
December 7, 2007
|
J-Flash:
Performance
