IAR TMPA910-SK
Head office Germany 
US office 
IAR TMPA910-SK Eval board
- TMPA910CRAXBG
- ARM926EJ-S
- TMPA910CRAXBG ARM9 microprocessor from Toshiba
- JTAG connector with ARM 2x10 pin layout for programming/debugging
- USB OTG driver and connector
- RS232 driver and 2 USART connectors
- LCD 3.5 inch QVGA TFT, display
- Outside extended SDRAM, NAND flash, NOR flash
- SD/MMC card connector
- Buzzer
- Ethernet
- Power jack 9V-15V
- 4-direction user joystick
- Audio jack (3.5 mm, mono)
- Reset button
- 24 MHz crystal oscillator
- 32 KHz crystal oscillator
- Power LED
- 8 user LEDs
- Potentiometer input analog signal
- Power jack
- RoHS compliant
Included software components:
Eval package:
The eval packages have been designed to provide customers and potential customers with a complete, easy to use software package for the specified target hardware and target compiler. They allow to easily check out the target hardware, the target compiler and our software components. This evaluation process typically does not take a lot of time since the software can be easily recompiled and downloaded to the target.
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive testing the hard- and software for fitnes. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
USB examples:
| The eval package includes USB bulk samples for simple data transfer between target and PC as well as device class samples, such as MSD, HID and CDC. |
File system examples:
 | The file system samples show basic directory and file operations. An explorer sample (emExplorer) is provided which allows browsing the content of the storage media used. |
TCP/IP examples:
 | The TCP/IP samples include ready to run client/server applications such as FTPserver, webserver and telnet server. The webserver sample uses the data stored in the file system (emFile), any storage media, such as MMC as data source for your webserver pages can be used. Built in pseudo CGI scripts known by the server can be used on every page. CGI scripts for embOS statistics are already included as sample.  Using the emFile/FTP server sample, data between the target and any other client using ethernet and FTP protocol can be transfered. Data, such as text, pictures etc. can be stored on any storage media accessible by emFile, target firmware updates can be done via FTP Server using a bootloader.  GUI based applications can be controlled via LAN or internet using the emWin VNC Server. It allows the user to view and control a computing 'desktop' environment from anywhere on the Internet and from a wide variety of machine architectures, communicating via TCP/IP. Input devices such as mouse support can be used to control the application via PC, even if the target hardware does not support this input device. The sample included demonstrates the TCP/IP Stack (embOS/IP) and emWin VNC Server showing a house control application. |
