EA LPC2468-16 OEM
Head office Germany 
US office 
Embedded Artists LPC2468-16 OEM Eval board
Controller:
- LPC2468 (NXP)
CPU:
- ARM7TDMI
OEM Board main features:
- 128 MB NAND Flash, 4 MB NOR Flash + 512 kB internal Flash
- 32 MB SDRAM + 96 KB internal RAM
- 16-bit data bus to SDRAM
- 100/10M Ethernet interface based on Micrel KSZ8001L Ethernet PHY
- 12.000 MHz crystal for CPU, 32.768 kHz crystal for RTC
- Two 100 pos Hirose expansion connector (FX8C-100), 0.6mm pitch
- 256 Kbit I2C E2PROM for storing non-volatile parameters
- Buffered 16-bit databus
Base board main features:
- Two 100 pos, 0.6mm pitch Hirose FX8C-100 connectors for OEM Board
- Ethernet connector (RJ45)
- MMC/SD interface & connector
- JTAG connector
- Pads for ETM connector
- USB OTG interface & connector
- USB device interface & connector
- USB host interface & connector
- Full modem RS232 on UART #1
- CAN interface & connector
- Power supply, either via USB or external 9-15V DC
- 0.3F capacitor backup for RTC
- Color QVGA LCD expansion connector (serial and parallel interface options)
- WLAN module (IEEE802.11b) expansion connector
- 5 push-button keys (4 via I2C)
- 5 LEDs (via I2C)
- 2 Analog inputs
- USB-to-serial bridge on UART #0, and ISP functionality
- Reset push-button and LED
- Speaker output on v1.5 of OEM Base Board
- All OEM Board signals available on expansion connector/pads
Controller main features:
- 32/16-bit RISC architecture (ARM v4T)
- 32-bit ARM instruction set for maximum performance and flexibility
- 16-bit Thumb instruction set for increased code density
- Unified bus interface, 32-bit data bus carries both instructions and data
- Three-stage pipeline
- 32-bit ALU
- Very small die size and low power consumption
- Coprocessor interface
- EmbeddedICE-RT real-time debug unit
- JTAG interface unit
- Interface for direct connection to Embedded Trace Macrocell (ETM)
Available software:
