Renesas
Head office Germany 
US office 
Renesas Eval boards
We have board support packages (BSPs) and complete projects available for various Renesas Eval boards.
Different software packages are available for different boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.
Supported Eval boards
MSC VisuRDK-H8S-NL3224
Controller:
- H8S/2378
CPU:
- H8S/2000
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available separately
MSC VisuRDK-H8SX1668R
Controller:
- H8SX/1668R
CPU:
- H8SX
Board main features:
- Ampire QVGA TFT LCD
- Ethernet Controller SMSC9118
- SD card slot
- MiniUSB device connector
- Internal NOR Flash
- One reset button
Renesas EDK2378
Controller:
- H8S/2378
CPU:
- H8S/2000
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available seperately
Renesas RSK+SH7203
Controller:
- SH7203
CPU:
- SH2A
Board main features:
- One reset switch
- Three user-defined switches
- USB Host and USB Device connector
- 100 MBits/s Ethernet controller
- Serial Sound Interface
- 4 MB external Flash ROM
- 16 MB external SDRAM
- QVGA LCD Display
Renesas RSK2+SH7670
Controller:
- SH7670
CPU:
- SH2A
Board main features:
- One reset switch
- Three user-defined switches
- USB Host and USB Device connector
- 100 MBits/s Ethernet controller
- Serial Sound Interface
- 4 MB external Flash ROM
- 16 MB external SDRAM
- QVGA LCD Display
Renesas RSK2R32C111 + Segger Visu Add on
Controller:
- R32C/111
CPU:
- R32C
Board main features:
- LCD module
- Two application board interfaces
- Serial port
- Three user-defined switches
- One reset switch
- Analog adjust
- Four user LEDs
- E8A connector
- E30A connector (not fitted)
Renesas RSKH8S2378
Controller:
- H8S/2378
CPU:
- H8S/2000
Board main features:
- Three switches (Reset, Boot, NMI)
- Four red LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- On-board SRAM (dependent on device)
- All I/O signals tracked to header pins for user access
- On-board FLASH programming using Flash Development Toolkit
- Standard serial port host interface
- PSU available seperately
Renesas RSKH8S2456
Controller:
- H8S/2456R
CPU:
- H8S/2600
Board main features:
- R4F24569 MCU
- 16 Mbit SPI Serial Flash (SST25VF016B-50-4C-S2AF)
- 64 Mbit SDRAM (MT48LC4M16A2P)
- 16 Mbit SRAM (R1LV1616RSA-5SI)
- Input clock 16 MHz
- Single-turn, 10 kO potentiometer
- 6 LEDs (1x Power indicator, 1x Boot indicator, 4x User)
- 4 switches (1x Reset, 1x User/Boot, 2x User)
- DC Power Jack, 5V input
- E10A-USB Header: 14-pin box header
- RS232 Serial Connector: 9-pin DSUB
- LCD Display Connector: 14-pin socket
- Generic LCD Panel Connector: 2.54 mm pitch, 46-pin
- USB Connector: 5-pin Mini-B
- Microcontroller Pin Header: 2.54 mm pitch, 36-pin x 3 (J1, J2, J3), 2.54 mm pitch, 18-pin x 2 (J4A, J4B)
- Application Board Interface: 2.54 mm pitch, 26-pin x 2 (JA1, JA2), 24-pin x 2 (JA5, JA6)
- BUS Interface Option: 2.54 mm pitch, 50-pin
Renesas RSKH8S2472
Controller:
- H8S/2472
CPU:
- H8S/2600
Board main features:
- Three switches (Reset, Boot, NMI)
- Four user LEDs
- Low cost second-generation (2G) evaluation board
- High-performance Embedded Workshop v3 debugger support
- All I/O signals tracked to header pins for user access
- Standard serial port host interface
Renesas RSKH8SX1668
Controller:
- R5F61668R
CPU:
- H8SX/1668R
Board main features:
- MiniUSB device connector
- Internal NOR Flash
- Three push buttons
- One reset button
Renesas RSKRX62N
Controller:
- RX62N
CPU:
- Renesas RX
Board main features:
- USB port connector
- Ethernet port connector
- Serial port connector
- Power supply LED: 1
- User LEDs
- additonal LCD can be connected
Renesas RSKSH2A7216
Controller:
- SH7216
CPU:
- SH-2A
Board main features:
- Expansion connectors (bus, I/O, VCC, GND)
- USB port connector (Series-B receptacle)
- Ethernet port connector (8-pin, RJ-45)
- Serial port connector (D-sub, 9-pin)
- RCAN port connector (D-sub, 9-pin)
- 14-pin H-UDI port connector
- 36-pin H-UDI port connector
- Power supply LED: 1
- User LEDs: 6
- PHY-LSI LEDs: 5
- Reset switch: 1
- NMI switch: 1
- IRQ6 switch: 1
- System setting DIP switches: 4/package
- User DIP switches: 4/package
- PHY-LSI setting DIP switches: 6/package
- Dimensions: 130 mm x 175 mm
- Mounting form: 4-layer, double-sided
Renesas RSKSH2A7264
Controller:
- SH7264
CPU:
- SH-2A
Board main features:
- USB port connector (Series-B receptacle)
- Ethernet port connector (8-pin, RJ-45)
- Serial port connector (D-sub, 9-pin)
- Power supply LED: 1
- User LEDs: 3
- LCD
