Renesas RSKH8S2456
Head office Germany 
US office 
Renesas RSKH8S2456
- H8S/2456R
- H8S/2600
- R4F24569 MCU
- 16 Mbit SPI Serial Flash (SST25VF016B-50-4C-S2AF)
- 64 Mbit SDRAM (MT48LC4M16A2P)
- 16 Mbit SRAM (R1LV1616RSA-5SI)
- Input clock 16 MHz
- Single-turn, 10 kO potentiometer
- 6 LEDs (1x Power indicator, 1x Boot indicator, 4x User)
- 4 switches (1x Reset, 1x User/Boot, 2x User)
- DC Power Jack, 5V input
- E10A-USB Header: 14-pin box header
- RS232 Serial Connector: 9-pin DSUB
- LCD Display Connector: 14-pin socket
- Generic LCD Panel Connector: 2.54 mm pitch, 46-pin
- USB Connector: 5-pin Mini-B
- Microcontroller Pin Header: 2.54 mm pitch, 36-pin x 3 (J1, J2, J3), 2.54 mm pitch, 18-pin x 2 (J4A, J4B)
- Application Board Interface: 2.54 mm pitch, 26-pin x 2 (JA1, JA2), 24-pin x 2 (JA5, JA6)
- BUS Interface Option: 2.54 mm pitch, 50-pin
- High performance 33MHz CPU with very deterministic operation due to zero wait-state Flash memory
- Eight 32-bit general-purpose registers and hardware multiplier
- ROM-less, 128K, 256K, and 512K embedded fullspeed Flash memory with up to 64K SRAM
- USB-FS 2.0 Device interface w/PHYon H8S/245x
- External DMA (EXDMA) to drive TFT-LCD panels up to WQVGA (480 x 272) with 16-bit color depth
- 4 channel internal DMA and DTC
- Strong timer resources (2x TPU, TMR, WDT)
- 5x USART (incl ISO7816 and IrDA), 4x IIC, SPI
- 16-channel 10-bit ADC, 2-channel 8-bit DAC
- External CPU Bus interface
- Low-power modes including deep standby
- Choice of 120-pin and 144-pin LQFP packages
- Operating voltage choices of 3.3V and 5V
- 32-bit H8SX upgrade devices (H8SX/166x, H8SX/165x) with up to 1MB Flash and 50 DMIPS. These MCUs can can drive up to VGA (640 x 480) TFT-LCD resolution with 16 bpp color depth
Subscribe to Renesas RSKH8S2456 eval software notification 
Eval Package:
The eval packages have been designed to provide customers and potential customers with a complete, easy to use software package for the specified target hardware and target compiler. They allow to easily check out the target hardware, the target compiler and our software components. This evaluation process typically does not take a lot of time since the software can be easily recompiled and downloaded to the target.
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive testing the hard- and software for fitnes. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
