J-Link ARM Lite
Head office Germany 
US office 
J-Link ARM Lite Emulator for ARM and Cortex-M3 cores
J-Link ARM Lite is a fully functional OEM-version of SEGGER J-Link ARM. If you are selling evaluation-boards, J-Link ARM Lite is an inexpensive emulator solution for you. Your customer receives a widely acknowledged JTAG-emulator which allows him to start right away with his development.
Features
- Very small form factor
- Fully software compatible to J-Link ARM
- Any ARM7/ARM9/ARM11, Cortex-M0/M1/M3 core supported
- JTAG clock up to 4 MHz
- SWD, SWO supported for Cortex-M devices
- Flash download into supported MCUs
- Standard 20-pin 0.1 inch JTAG connector (compatible to J-Link ARM)
- 3.3V target interface voltage (5V tolerant)
Subscribe to J-Link software notification
Specifications
| General | |
|---|---|
| Supported OS | Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64 |
| Electromagnetic compatibility (EMC) | EN 55022, EN 55024 |
| Operating temperature | +5°C ... +60°C |
| Storage temperature | -20°C ... +65 °C |
| Relative humidity (non-condensing) | Max. 90% rH |
| Size (without cables) | 28mm x 26mm x 7mm |
| Weight (without cables) | 6g |
| Mechanical | |
| USB interface | USB 2.0, full speed |
| Target interface | JTAG 20-pin (14-pin adapter available) |
| JTAG/SWD Interface, Electrical | |
| Power supply | USB powered Max. 50mA + Target Supply current. |
| Target interface voltage (VIF) | 3.3V (5V tolerant) |
| Target supply voltage | 4.5V ... 5V (if powered with 5V on USB) |
| Target supply current | Max. 300mA |
| LOW level input voltage (VIL) | Max. 40% of VIF |
| HIGH level input voltage (VIH) | Min. 60% of VIF |
| JTAG/SWD Interface, Timing | |
| Data input rise time (Trdi) | Max. 20ns |
| Data input fall time (Tfdi) | Max. 20ns |
| Data output rise time (Trdo) | Max. 10ns |
| Data output fall time (Tfdo) | Max. 10ns |
| Clock rise time (Trc) | Max. 10ns |
| Clock fall time (Tfc) | Max. 10ns |
If you are interested in J-Link Lite, please contact info@segger.com
Note
J-Link ARM Lite is only delivered and supported as part of Starter Kits.
It is not sold to end customer and not guaranteed to work with custom hardware.
