IAR LPC11A1x-SK
Head office Germany 
US office 
IAR LPC11A1x-SK
Controller:
- LPC11A14F/301 (NXP)
CPU:
- Cortex-M0
Board main features:
- Small 8 character 7 segment display (low power)
- 2xADC input channels - Potentiometer (AN-TR trimpot)
- 1xDAC output (buzzer or speaker), disconnection via jumper
- 8 LEDs - GPIO
- 1 User button, also connected to external interrupt
- Wake-up button
- JTAG/SWD connector – 20-pin 0.1’’ defined by ARM
- Cortex Debug connector – 10- pin 0.05’’ connector
- RS232/485 connector - DB9 connector, ISP support
- USB/UART bridge (FTDI) - USB connector
- Power through J-Link (pin 19), USB or external supply
- Power supply LED
- Battery powered option
- Reset button and circuit
Controller main features:
- 32KB flash
- 8KB SRAM
- 4KB EEPROM
- 16KB boot ROM
- Frequencies up to 50MHz
- 10-bit ADC/DAC
- USART with fractional baud rate generation
- I2C-bus interface
- Four reduced power modes: Sleep, Deep-sleep, Power-down and Deep power-down
