Flasher STM8
Head office Germany 
US office 
Flasher STM8 - Flash programmer for STM8 series of flash microcontrollers with on-chip flash
Features
- All STM8 devices can be programmed
- Integrated optical isolation between host and target system
- Standard 4-pin SWIM connector
- USB 2.0 interface
- Full duplex 100Mbit Ethernet interface
- Target voltage can be measured & monitored during program
- Fully plug and play compatible
- USB, Ethernet, RS232 and 4-pin ribbon cable included
- Windows PC software included
- Target power supply via pin 1 of the 4-pin interface (up to 300mA to target with overload protection)
Subscribe to Flasher STM8 software notification
Specifications
| General | |
|---|---|
| Supported OS | Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64 |
| Electromagnetic compatibility (EMC) | EN 55022, EN 55024 |
| Operating temperature | +5°C ... +60°C |
| Storage temperature | -20°C ... +65 °C |
| Relative humidity (non-condensing) | Max. 90% rH |
| Size (without cables) | 121mm x 66mm x 30mm |
| Weight (without cables) | 122g |
| Mechanical | |
| USB interface | USB 2.0, full speed |
| Ethernet interface | 100Mbit, full duplex |
| RS232 Host interface | RS232 9-pin |
| Target interface | SWIM 4-pin connector |
| SWIM interface, Electrical | |
| Power supply | USB powered, 100mA for Flasher STM8. 500mA if target is powered by Flasher STM8. |
| Target interface voltage (VIF) | 1.2V ... 5V |
| Target supply voltage | 4.5V ... 5V (if powered with 5V on USB) |
| Target supply current | Max. 300mA |
| LOW level input voltage (VIL) | Max. 40% of VIF |
| HIGH level input voltage (VIH) | Min. 60% of VIF |
