Flasher 5 - Flash programmer for M16C, M32C, R8C, R32C, M38000 and ST9 series of flash microcontrollers

Features

Small, compact housing
Easy to use windows program
Serial (in target) programming supported
Programming / Verifying / Read back supported
2MByte internal Flash memory to store target program
High speed programming: app. 17 sec for 256 kb in serial mode with 10 MHz M16C target for programming and verification
Can be used in a production environment
PC program allows batch mode processing for usage in automated test systems.
Once set up, Flasher can be controlled without the use of PC program
ASCII command interface to control Flasher without the use of PC program (Requires firmware version 1.84 or above)

Documentation download Subscribe to Flasher 5/ST7 software notification

New features

January 2010:
Support for RENESAS R8C/32A added.
Support for RENESAS R8C/32C added.
Support for RENESAS R8C/3JA added.
Support for RENESAS R8C/33A added.
Support for RENESAS R8C/33C added.
Support for RENESAS R8C/33T added.
Support for RENESAS R8C/35A added.
Support for RENESAS R8C/35C added.

November 2009:
Support for RENESAS R8C/34E added.
Support for RENESAS R8C/34F added.
Support for RENESAS R8C/34G added.
Support for RENESAS R8C/34H added.
Support for RENESAS R8C/36E added.
Support for RENESAS R8C/36F added.
Support for RENESAS R8C/36G added.
Support for RENESAS R8C/36F added.
Support for RENESAS R8C/38E added.
Support for RENESAS R8C/38F added.
Support for RENESAS R8C/38G added.
Support for RENESAS R8C/38F added.
Support for RENESAS M16C/6C added.
Support for RENESAS M16C/64A added.

January 2009:
Support for RENESAS R8C/1A added.
Support for RENESAS R8C/1B added.
Support for RENESAS R8C/24 added.
Support for RENESAS R8C/25 added.
Support for RENESAS R8C/2A added.
Support for RENESAS R8C/2B added.
Support for RENESAS R8C/2C added.
Support for RENESAS R8C/2D added.
Support for RENESAS M16C/56 added.
Support for RENESAS M16C/5L added.
Support for RENESAS M16C/63 added.
Support for RENESAS M16C/65 added.
Support for RENESAS M38049FFHSP and M38049FFHFP added.

April 2008:
Support for RENESAS M16C/28B, M3062LFGPFP, M3062LFGPGP added.

March 2008:
Support for RENESAS R8C/28, R8C29, M16C/64, M16C/65, M16C/6s added.

December 2007:
Support for RENESAS R32C and R8C added.

October 2006:
Flasher 5 rev. 3 comes with 2MByte Flash to store target data.
This allows programming of all RENESAS CPUs with more than 512KB Flash when Software 1.96a or above is used.
All Flasher 5 with series number above 51584 can be upgraded by just using the new Flasher software.

May 2005:
Up to 20 COM ports supported by FLASHER PC program.
Additional options and commandline parameter added.
Multiple individual setups can be controlled with command line to support multiple Flasher on one PC.

January 2004:
ASCII command interface implemented to control Flasher from any application without the need of Flasher PC program.
A manual which describes ASCII command interface and new Flasher software can be downloaded from our downloadpage.