Beta software version
| J-Link software (beta version) including:
|
Software download
Software and documentation pack V4.17a [8686 kb]
Can be used with Segger J-Link, IAR J-Link, SAM-ICE, mIDASLink, DIGI JTAG Link, J-Link KS hardware and any other licensed J-Link compatible emulator. [J-Link info...]
Changes from version V4.14
- [J-Link DLL]
New features: - Flash programming support for some new MCUs:
NXP LPC11C12
NXP LPC11C14
ST STM32F100C4
ST STM32F100C6
ST STM32F100C8
ST STM32F100CB
ST STM32F100R4
ST STM32F100R8
ST STM32F100RB
ST STM32F100V8
ST STM32F100VB Toshiba TMPM361F10FG
Toshiba TMPM363F10FG
Toshiba TMPM364F10FG - If a watchpoint was "cleared" and a reset followed, the watchpoint was not cleared properly.
Improved - New TMS570 devices were not auto-detected correctly.
- Reset did not work properly on TMS570 if nRST is connected to Power-on-Reset.
Corrected: - Cortex-R4: When reading multiple words, the word preceding the last one, was read incorrectly
- LPC11xx: SYSMEMREMAP register value was changed back to 2 accidentially.
- Flash programming support for some new MCUs:
- [J-Flash]
New features: Improved: - Some flash devices which use the AMD algorithm need 12-bit adress offsets for the erasure/programming procedure. Some flashes need 16-bit offsets. J-Flash used 16-bit offsets only.
- Support for new flash devices added:
Numonyx M58WR016KB
Numonyx M58WR016KT
Numonyx M58WR032KB
Numonyx M58WR032KT
Numonyx M58WR064KB
Numonyx M58WR064KT
Corrected: - When using the "allow opt. bytes" option for the STM32F103ZF/ZG devices, the base address was set to 0x8000000 (incorrect) instead of 0x6000000
- [Flasher ARM]
New features: - Flash programming support: See J-Flash
Improved: - -
Corrected: - -
- [GDB Server]
New features: - -
Improved: - -
Corrected: - Cortex-M3: MSP/PSP was not displayed/selected correctly
- [RDI DLL]
New features: - -
Improved: - -
Corrected: - -
Beta software version
Head office Germany
US office 

