Atmel
Head office Germany 
US office 
Atmel Eval boards
We have board support packages (BSPs) and complete projects available for various Atmel Eval boards.
Different software packages are available for different boards; the packages include some or all of the following components:
- embOS - real time OS / RTOS
- emWin - graphic software / GUI
- emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
- emUSB - USB device stack with support for bulk, MSD, CDC, HID and more
Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.
Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.
Supported Eval boards
Atmel AT91RM9200
Controller:
- AT91RM9200
CPU:
- ARM920T
Board main features:
- 8 Mbytes of parallel Flash memory
- Four banks of 2M x 32-bit SDRAM
- DataFlash or SD/MMC memory expansion socket
- Additional DataFlash® memory expansion socket
- Digital-to-Analog Converter (DAC) for a stereo audio signal
- Four communication ports (USB host and device, Ethernet, serial and DBGU)
- Graphic controller with output to a standard VGA monitor
- JTAG/ICE, ETM and code test port interface
- Expansion connector
- Onboard prototype area
Atmel AT91SAM7A3
Controller:
- AT91SAM7A3
CPU:
- ARM7TDMI
Board main features:
- USB device port interface
- One DBGU serial communication port
- JTAG/ICE debug interface connector
- Two serial CAN communication ports
- One serial LIN communication port
- One buffered analog input and PWM output
- One Power LED and four general-purpose LEDs
- One SD/MMC/DataFlash® card slot
- Expansion connector
- One Atmel 32 Mbit serial DataFlash® (AT45DB321C-CNC)
- One footprint for 3.6V lithium thionyl-chloride backup battery
Atmel AT91SAM7S
Controller:
- AT91SAM7S 64/256
CPU:
- ARM7TDMI
Board main features:
- USB device port interface
- Two serial communication ports
- One Atmel Crypto memory
- JTAG/ICE debug interface
- Four buffered analog inputs
- Four general-purpose LEDs and pushbuttons
- Expansion connector
- Prototyping area
Atmel AT91SAM7SE
Controller:
- AT91SAM7SE
CPU:
- ARM7TDMI
Board main features:
- 32 Mbytes of SDRAM memory
- 256 Mbytes of NAND Flash memory
- One USB device port interface
- One DBGU serial communication port
- One additional serial communication port with RTS/CTS handshake control
- One JTAG/ICE debug interface
- One Atmel AT73C213 Stereo Audio DAC
- One power LED and two general-purpose LEDs
- One joystick and two user input pushbuttons
- One Reset pushbutton
- Three expansion connectors (PIO A, PIO B, PIO C)
- One EBI expansion BGA-like footprint connector
Atmel AT91SAM7X
Controller:
- AT91SAM7X
CPU:
- ARM7TDMI
Board main features:
- Serial CAN communication ports
- Buffered analog input and PWM output
- One Reset pushbutton
- Power LED and general-purpose LEDs
- One DataFlash® card slot
- One expansion connector
- Atmel 32 Mbit serial DataFlash® (AT45DB321C-CNC)
- One footprint for Atmel Serial EEPROM (MN11)
- One joystick
- One JTAG/ICE debug interface
- Prototyping area
Atmel AT91SAM9261-EK
Controller:
- AT91SAM9261
CPU:
- ARM926EJ-S
Board main features:
- 64 Mbytes of SDRAM
- 256 Mbytes of NAND Flash memory
- One Ethernet 100-base TX with three status LEDs
- Atmel AT73C213 Audio DAC
- 3.5" 1/4 VGA TFT LCD Module with TouchScreen and backlight
- DataFlash® SD/MMC Card slot
- One USB device port interface
- Two USB host port interfaces
- One DBGU serial communication port
Atmel AT91SAM9263-EK
Controller:
- AT91SAM9263
CPU:
- ARM926EJ-S
Board main features:
- 64 Mbytes of SDRAM
- 256 Mbytes of NAND Flash memory
- One Ethernet 100-base TX with three status LEDs
- Atmel AT73C213 Audio DAC
- 3.5" 1/4 VGA TFT LCD Module with TouchScreen and backlight
- One USB device port interface
- Two USB host port interfaces
- One DBGU serial communication port
Atmel AT91SAM9G20-EK
Controller:
- AT91SAM9G20
CPU:
- ARM926EJ-S
Board main features::
- 64 Mbytes of SDRAM memory
- 256 Mbytes of NAND Flash memory
- Atmel® serial DataFlash®
- Atmel TWI serial EEPROM
- USB Device port interface
- 2 USB Host port interfaces
- DBGU serial communication port
- complete MODEM serial
- communication port
- additional serial communication port with RTS/CTS handshake control
- JTAG/ICE debug interface
- 1 PHY Ethernet 100-base TX with three status LEDs
- one on-board Audio DAC
- one Power LED and one general-purpose LED
Atmel AT91SAM9G45-EK
Controller:
- AT91SAM9G45
CPU:
- ARM926EJ-S
Board main features:
- 128 Mbytes of DDR2 memory
- 2 Gbytes of NAND Flash memory
- 32 MByte SPI DataFlash
- USB Device port interface
- USB Host port interfaces
- DBGU serial communication port
- JTAG/ICE debug interface
- 1 PHY Ethernet 100-base TX with three status LEDs
- one on-board Audio DAC
- Power LED
- general-purpose LEDs
- Microphone
- Audio Line In
- SD Card Interface
- 24 Bit color WQVGA TFT with Touch
- Backup Battery
- Image Sensor Interface
Atmel AT91SAM9RL64-EK
Controller:
- AT91SAM9RL64
CPU:
- ARM926EJ-S
Board main features:
- 64 Mbytes of SDRAM
- 256 Mbytes of NAND Flash memory
- One Ethernet 100-base TX with three status LEDs
- Atmel AT73C213 Audio DAC
- 3.5" 1/4 VGA TFT LCD Module with TouchScreen and backlight
- DataFlash® SD/MMC Card slot
- One USB device port interface
- Two USB host port interfaces
- One DBGU serial communication port
Atmel EVK1100
Controller:
- AT32UC3A0512
CPU:
- AVR32
Board main features:
- 1 x Atmel DataFlash (8 MBytes)
- 1 x SDRAM (32 MBytes)
- 2 x USARTs
- Supports the AT32UC3A
- Ethernet (External Ethernet Phy 10/100 and RJ45 connector)
- Sensors: Light, Temperature, Potentiometer
- 4x20 Blue LCD (PWM Adjustable backlight)
- Connectors for JTAG, Nexus, USART, USB 2.0, TWI, SPI
- SD and MMC Card Reader
Atmel EVK1101
Controller:
- AT32UC3B0256
CPU:
- AVR32
Board main features:
- Supports the AT32UC3B
- Sensors: Light, Temperature
- Connectors for JTAG, Nexus, USART, USB 2.0, TWI, SPI
- SD and MMC Card Reader
Atmel EVK1104
Controller:
- AVR32UC3A3
CPU:
- AVR32
Board main features:
- Supports the AVR32UC3A3256
- Connectors for JTAG, Nexus, USART, USB 2.0, TWI, SPI
- SD and MMC Card Reader
Atmel NGW100
Controller:
- AT32AP7000
CPU:
- AVR32
Board main features:
- 32MB SDRAM
- 16MB on-board flash
- Two ethernet connectors
- Expandable memory through SD or MMC memory cards
- USB connector
- JTAG connector for debugging or programming of flash
- Expansion connectors with 63 general purpose IO or peripheal modules from AP7000
- Power system and status LEDs
- Two user controllable LEDs
- Footprint for mictor-38 connector for NEXUS emulator
Atmel SAM3U-EK
Controller:
- AT91SAM3U4E
CPU:
- ARM Cortex-M3
Board main features:
- SAM3U4E QFP chip with optional socket footprint
- 12 MHz crystal
- 32.768 KHz crystal
- Optional SMB connector, for external system clock input
- PSRAM
- NAND-Flash
- Backup Battery
- 2.8 inch TFT color LCD display with touch-panel and backlight
- UART port with level shifter IC
- USART port with level shifter IC
- Audio codec with input and output jacks: stereo headphone out, stereo line in, mono microphone in
- SD/MMC interface
- 3-D accelerometer sensor
- Temperature sensor
- Reset and Wake-Up buttons: NRST, NRSTB, FWUP
- User buttons: Left and Right
- High Speed USB device port
- JTAG port
- On-board power regulation with shutdown control (by the SAM3 chip)
- Two user LEDs
- Power LED
- BNC connectors for ADC input
- User potentiometer connected to the ADC input
- ZigBee® connector
- 3x32 bit PIO connection interfaces (PIOA, PIOB, PIOC)
Cogent CSB737
Controller:
- AT91SAM9263
CPU:
- ARM926EJ-S
Board main features:
- 64Mbyte 32-Bit Wide SDRAM
- 64Mbyte 16-Bit Wide Spansion S29GL512N NOR Flash
- 512MByte 8-Bit Wide NAND Flash
- LCD Controller On-Chip 16-Bit RGB LCD Controller up to 1024 x 768, 8MByte PSRAM Frame Buffer
- 2D Graphics On-Chip 2D Graphics Drawing Engine
- 1x Debug RS232 (2-wire), plus one 4-wire TTL UART and Two 2-wire TTL UARTS
- I2C, SPI x2, SSI and 4-Bit SDIO/MMC Controller (Socket is off board)
- Unique ID via Electronic Serial Number (ESN) in Spansion S29GL512N Flash
- On-Chip 10/100 Ethernet Controller with Low Power LAN8700 PHY
- DS1339 RTC with External Battery Input
- 10 Dedicated GPIO (more may be available depending upon Peripheral use)
- Dual USB 2.0, 12Mbit USB Host
- Single USB 2.0, 12Mbit USB device
- AC97 Audio Interface
- Single Channel CAN 2.0B interface, 1MBit
- Compact Flash Interface
- Standard ARM JTAG Interface
- 6V to 35V power input, On-Board 3.3V Regulator (up to 2A is available off board)
Olimex SAM7S-P256
Controller:
- AT91SAM7S 256
CPU:
- ARM7TDMI
Board main features:
- USB device port interface
- Two serial communication ports
- JTAG/ICE debug interface
- SD card interface
- Expansion connector
- Prototyping area
Segger SAM7-MSD
Controller:
- AT91SAM7S (Atmel)
CPU:
- ARM7TDMI
Board main features:
- One communication port (USB device)
- One SD/MMC/DataFlash® card slot
- One JTAG debug interface
