Freescale CodeWarrior

Freescale CodeWarrior Development Studio for Microcontrollers (in the following referenced as CodeWarrior) is an Eclipse based IDE from Freescale which amongst others supports the Freescale Kinetis MCU (Cortex-M4) family. J-Link is natively supported since CodeWarrior V10.1 and does not require additional software components like the J-Link GDBServer. For more information about CodeWarrior and the installation process, please refer to www.freescale.com.

In the following, a short step-by-step tutorial how to get up and running with CodeWarrior and J-Link in general is given. For this tutorial, the sample project generator that is integrated into CodeWarrior was used.

• Select File | New | Project ... from the main menu
• Select Bareboard Project
• Click Next
  
• Enter a project name
• Click Next
  
• Select the device for which the project shall be created
• Click Next
  
• Select Segger J-Link / J-Trace / SWO (SWD based) in order to use J-Link as emulator
• Click Next
  
• Click Next
  
• Click Next
  
• Click Finish
  
• Click the Build button
  
• Select Run| Debug Configurations | ... from the menu
• Select the debug configuration which should be used in the debug session
• Click the Debug button
  

Now you are ready to go

Now you can start debugging and use J-Link with Freescale's CodeWarrior Developement Studio IDE.