Segger Logo Embedded Software Solutions
Software productsHardware productsDownloadsPricesCustomersOur PartnersSitemapForumAbout us
Cogent CSB737 Eval Board
| Analog Devices |Atmel |Freescale |LuminaryMicro |Microchip |NEC |NXP |Oki |Renesas |Sharp |ST Microelectronics |Texas Instruments |Toshiba |

We have board support packages (BSPs) and complete projects available for various Atmel Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

  • embOS - real time OS / RTOS
  • emWin - graphic software / GUI
  • emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
  • emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

CSB737

Cogent CSB737 Eval board

 

Controller:
  • AT91SAM9263 (Atmel)
CPU:
  • ARM926EJ-S

Board main features:
  • 64Mbyte 32-Bit Wide SDRAM
  • 64Mbyte 16-Bit Wide Spansion S29GL512N NOR Flash
  • 512MByte 8-Bit Wide NAND Flash
  • LCD Controller On-Chip 16-Bit RGB LCD Controller up to 1024 x 768, 8MByte PSRAM Frame Buffer
  • 2D Graphics On-Chip 2D Graphics Drawing Engine
  • 1x Debug RS232 (2-wire), plus one 4-wire TTL UART and Two 2-wire TTL UARTS
  • I2C, SPI x2, SSI and 4-Bit SDIO/MMC Controller (Socket is off board)
  • Unique ID via Electronic Serial Number (ESN) in Spansion S29GL512N Flash
  • On-Chip 10/100 Ethernet Controller with Low Power LAN8700 PHY
  • DS1339 RTC with External Battery Input
  • 10 Dedicated GPIO (more may be available depending upon Peripheral use)
  • Dual USB 2.0, 12Mbit USB Host
  • Single USB 2.0, 12Mbit USB device
  • AC97 Audio Interface
  • Single Channel CAN 2.0B interface, 1MBit
  • Compact Flash Interface
  • Standard ARM JTAG Interface
  • 6V to 35V power input, On-Board 3.3V Regulator (up to 2A is available off board)

Processor main features:
  • Supports the 32-bit ARM and 16-bit Thumb instruction sets
  • Efficient execution of Java byte codes
  • Supports ARM debug architecture
  • Has a Hardvard cached architecture
  • Memory Management Unit (MMU)
  • Separate instruction and data AMBA AHB bus interfaces
  • Separate instruction and data TCM interfaces

Available software:
Segger Eval Software (emWin, embOS) IARV5