Software for Analog Devices Eval boards

We have board support packages (BSPs) and complete projects available for various Analog Devices Eval boards.

Different software packages are available for different boards; the packages include some or all of the following components:

embOS - real time OS / RTOS
emWin - graphic software / GUI
emFile - file system with support for NAND-, NOR- flashes, SD, CF cards, IDE and more
emUSB - USB device stack with support for bulk, MSD, CDC, HID and more

Some packages are executable demos, which can not be modified; some packages are trial versions, which come with the software in a library and the application in source code form, as well as a project for the IDE that has been used. Trial versions can usually be recompiled easily in less than a minute if the required compiler and IDE is installed. The application program can be modified, allowing intensive tests of the software. emWin trial versions usually also contain a simulation environment which allows test and recompilation on a PC.

Below is a list of supported Eval boards. The software can easily be ported to other hardware platforms. If you are looking for software for an Eval board not in this list, please get in touch with us.

Supported Eval boards

Analog Devices Eval boards

Analog Devices ADuC7026 Eval board

Analog Devices ADuC7128 Eval board

Analog Devices ADuC7026 Eval board

Controller:

ADUC7026 G3U/I3R (G-Chip or I-Chip)

CPU:

ARM7TDMI

Board main Features:

2-Layer PCB (4" x 5" form factor)
9 V power supply regulated to 3.3 V on board
4-pin UART header to connect to RS-232 interface cable
20-pin standard JTAG connector to connect to ULINK emulator
Demonstration circuit
32.768 kHz watch crystal to drive the PLL clock
ADR291 2.5 V external reference chip
Reset/Download/IRQ0 push-buttons
Power indicator/general-purpose LEDs
Access to all ADC inputs and DAC output from external header. All device ports are brought out to external header pins.
Surface-mount and through hole general-purpose prototype area
External memory and latch footprint

Analog Devices ADuC7128 Eval board

Controller:

ADUC7229

CPU:

ARM7TDMI

Board main Features:

Reset / Download / IRQ0 push-buttons